Please see below a list of all error codes used in the Check Workforce Census.Use the search field to find an error code.
For a printable version of the error codes, please click here.
| Error Code | Error Message | Query/Issue | Comment / Resolution |
|---|---|---|---|
| 6550Q | At least one staff record in this school's return should show a role of SENC (SEN Co-ordinator) under a current contract. Where SENCO is missing please add it to the appropriate staff record | Query Only - This will not prevent you from submitting your Workforce Census | There must be at least one employee per location with the Role of SEN Co-ordinator The Field can be found in HR Record > Employment > Employment History > Workforce Census. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 6540Q | At least one staff record in this school’s return should show a role of Head Teacher or Executive Head Teacher | Query Only - This will not prevent you from submitting your Workforce Census | There must be at least one employee per location with the Role of Head Teacher or Executive Head Teacher. The Field can be found in HR Record > Employment > Employment History > Workforce Census. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 6530Q | The same person has a total Full Time Equivalent ratio greater than 1.5 | Query Only - This will not prevent you from submitting your Workforce Census | An Employee's overall FTE is calulating as working over 1.5. Possible causes for this may be multiple contracts adding up to an FTE of over 1.5 or Hours per Week/ Weeks per Yea r being entered that are over those set out in the Whole Time Equivalent . The field can be found in HR Record > Employment > Employment History > Details If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 6510 | There is more than one record with the same NI Number | Error - Correct issue before submitting your Workforce Census | Two or more Employee References share the same NI Number . Check and adjust accordingly. If an employee has more than one HR Record, only one HR Record should be submitted to COLLECT. This may however cause difficulty where contracts should be submitted from both HR Records. This field can be found in HR Record > Workforce Census > HR Record. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 6500 | There is more than one record with the same Teacher Number | Error - Correct issue before submitting your Workforce Census | Two or more Employee References share the same Teacher Number. Check and adjust accordingly. If an employee has more than one HR Record, only one HR Record should be submitted to COLLECT. This may however cause difficulty where contracts should be submitted from both HR Records. This field can be found in HR Record > Workforce Census > HR Record . You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 6250 | Too many Subjects have been recorded for this Qualification. There must be no more than two | Error - Correct issue before submitting your Workforce Census | The system will not allow you to enter more than two Subject Codes per qualification. |
| 6245 | Qualification Subject Codes cannot be the same | Error - Correct issue before submitting your Workforce Census | Check the employee's Qualification Subject Codes. Subject Code One and Two have been given the same value. If not a joint subject qualification then Subject Code Two must be left blank. This field can be found in HR Record > Credentials > Qualifications . Select the appropriate qualification. |
| 6220 | Subject Code is invalid | Error - Correct issue before submitting your Workforce Census | Check the employee's Qualification Subject Codes. Subject Code One and/or Two is invalid on the qualification entry. Select the Subject Code from the drop down. This field can be found in HR Record > Credentials > Qualifications. Select the appropriate qualification. |
| 6210 | Qualification Code is missing | Error - Correct issue before submitting your Workforce Census | Check the set up of the Credential associated to the employee. A SWC Qualification Category is required to be mapped to the Credential field. This field is found in Personnel > Definitons > Staff Development > Credentials |
| 6205 | Class of Degree must be provided for teachers with a degree arriving in the school. from 1 August 2013 | Error - Correct issue before submitting your Workforce Census | Check the employee's Qualification Class of Degree. The Class of Degree is required for all employees with a Role of Teacher with a Date Started after 1 August 2013. |
| 6200 | Qualification Code is invalid | Error - Correct issue before submitting your Workforce Census | Check the set up of the Credential associated to the employee. An incorrect SWC Qualification Category has been mapped to the Credential field. This field is found in Personnel > Definitons > Staff Development > Credentials |
| 6145 | Two or more curriculum records with the same Subject/Year Group combination | Error - Correct issue before submitting your Workforce Census | Check the employee's Curriculum Entry. There are two or more entries for the same Subject and Year Group. Delete the incorrect entry. This field is found in HR Record > Workforce Census > Curriculum |
| 6140 | Year Group is missing | Error - Correct issue before submitting your Workforce Census | Check the employee's Curriculum Entry. The Year Group is required for the Curriculum Entry. Select the entry from the list provided. This field is found in HR Record > Workforce Census > Curriculum |
| 6130 | Year Group (NC Year Group) is invalid | Error - Correct issue before submitting your Workforce Census | Check the employee's Curriculum Entry. The Year Group is invalid for the Curriculum Entry. Select the entry from the list provided. This field is found in HR Record > Workforce Census > Curriculum |
| 6120 | Subject Hours is missing | Error - Correct issue before submitting your Workforce Census | Check the employee's Curriculum Entry. The Subject Hours is missing for the Curriculum Entry against the employee. This field is found in HR Record > Workforce Census > Curriculum |
| 6110 | Subject Hours is invalid. Subject hours should be in the format 99.99 and should be less than or equal to 40.00 | Error - Correct issue before submitting your Workforce Census | Check the employee's Curriculum Entry. The Subject Code is invalid for the Curriculum Entry select the entry from the list provided. This field is found in HR Record > Workforce Census > Curriculum |
| 6100 | Subject Code is missing | Error - Correct issue before submitting your Workforce Census | Check the employee's Curriculum Entry. The Subject Code is missing for the Curriculum Entry against the employee. This field is found in HR Record > Workforce Census > Curriculum |
| 6000 | Absence Category is missing | Error - Correct issue before submitting your Workforce Census | Check the set up of the Absence Analysis. The SWC Absence Categories must be mapped to each Absence Analysis using the drop down to ensure the Absence Category is valid. This field is found in Personnel > Definitions > Absence Monitoring > Absence Analysis. |
| 5010 | Absence Category is missing | Error - Correct issue before submitting your Workforce Census | Check the set up of the Absence Analysis. The SWC Absence Categories must be mapped to each Absence Analysis using the drop down to ensure the Absence Category is valid. This field is found in Personnel > Definitions > Absence Monitoring > Absence Analysis. |
| 5000 | Absence Category is invalid | Error - Correct issue before submitting your Workforce Census | Check the set up of the Absence Analysis. The SWC Absence Categories must be mapped to each Absence Analysis using the drop down to ensure the Absence Category is valid. This field is found in Personnel > Definitions > Absence Monitoring > Absence Analysis. |
| 4992 | Where Last Day of a pregnancy related absence is provided then the number of Working Days Lost must be greater than zero | Error - Correct issue before submitting your Workforce Census | Check the employee's Absence Working Days. The absence record must have an entry in the Working Days if the record has an End Date. This field is found in HR Record > Personal > Absences. Select the appropriate absence record. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4990 | Where Last Day of a sickness absence is provided then the number of Working Days Lost must be greater than zero | Error - Correct issue before submitting your Workforce Census | Check the employee's Absence Working Days. The absence record must have an entry in the Working Days if the record has an End Date. This field is found in HR Record > Personal > Absences. Select the appropriate absence record. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4980 | Working Days Lost is in an invalid format. Format must be 999.9 and should be to the nearest half-day | Error - Correct issue before submitting your Workforce Census | Check the employee's Absence Working days. The absence record has an invalid format for the Working Days . Working Days will automatically be given an allocation to the nearest half day based on your Entries of AM/PM , if entered. The Working Days will also automatically calculate in the correct format. Ensure that the Working Days has not been overtyped. You can force the calculation by clicking the calculate box next to the field. This field is found in HR Record > Personal > Absences. Select the appropriate absence record. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4960Q | More than one absence record with absence category of sickness or pregnancy related absence covering the same date(s): Please supply a reason in a return level note | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's Absence Start Date and/or End Date. There is more than one sickness or pregnancy absence for the employee within the same date range. Confirm this is correct. This field is found in HR Record > Personal > Absences. Select the appropriate absence record. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4950Q | More than one absence record without an end date, please confirm if this is correct | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's Absence End Date. There is more than one absence for the employee without an End Date . Confirm this is correct. This field is found in HR Record > Personal > Absences. Select the appropriate absence record. You may also click the entry within the Check Workforce Census to be directed straight into this window. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4945Q | Last Day of absence is not expected to be after | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's Absence End Date. The absence record requires an End Date that is prior to the Census Date unless the absence is a result of maternity and paternity. Check that this is correct. This field is found in HR Record > Personal > Absences. Select the appropriate absence record. You may also click the entry within the Check Workforce Census to be directed straight into this window. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4940 | Last Day of absence cannot be before First Day of absence | Error - Correct issue before submitting your Workforce Census | Check the employee's Absence Start Date and/or End Date .The absence record requires the Start Date to be prior to the End Date , adjust accordingly. This field is found in HR Record > Personal > Absences. Select the appropriate absence record. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4936 | Last Day of absence must be in the current or preceding academic year | Error - Correct issue before submitting your Workforce Census | Check the employee's Absence End Date. The absence record requires an End Date that is either in the current or previous academic year, unless the absence is still ongoing. This field is found in HR Record > Personal > Absences. Select the appropriate absence record. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4935Q | Last Day of absence is missing for a non-maternity absence – please confirm if absence is ongoing | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's Absence End Date. The absence record requires an End Date unless the absence is still ongoing. Confirm the absence record should not currently have an End Date. This field is found in HR Record > Personal > Absences. Select the appropriate absence record. You may also click the entry within the Check Workforce Census to be directed straight into this window. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4930 | Last Day of absence is in an invalid format. Format must be CCYY-MM-DD | Error - Correct issue before submitting your Workforce Census | Check the employee's Absence End Date. The absence record has an incorrect End Date format. The format used must be DD/MM/YYYY. This field is found in HR Record > Personal > Absences . Select the appropriate absence record. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4920 | First Day of absence must be in the previous academic year (01/09/2017 to 31/08/2018 | Error - Correct issue before submitting your Workforce Census | Check the employee's Absence Start Date. The absence record requires a Start Date in range of the Previous Academic Year. The system will automatically exclude absences outside of the Previous Academic Year. This field is found in HR Record > Personal > Absences . Select the appropriate absence record. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4910 | First Day of absence is missing | Error - Correct issue before submitting your Workforce Census | Check the employee's Absence Start Date. The absence record requires a Start Date . The format used must be DD/MM/YYYY. This field is found in HR Record > Personal > Absences . Select the appropriate absence record. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4900 | First Day of absence is invalid | Error - Correct issue before submitting your Workforce Census | Check the employee's Absence Start Date. The absence record has an incorrect Start Date format. The format used must be DD/MM/YYYY. This field is found in HR Record > Personal > Absences . Select the appropriate absence record. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4834Q | Additional payment start date is before beginning of previous academic year: please supply a reason in a return level note. | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's Fixed Payment/Deduction. The Employee's Payment/Deduction Date Range Start Date is out of scope. Check the start date is correct. This field can be found in HR Record > Payroll Details > Fixed Payments/Deductions. Select the appropriate Payment/Deduction entry. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4833 | Start and end dates of TLR3 payment must be provided. | Error - Correct issue before submitting your Workforce Census | Check the employee's Fixed Payment/Deduction. The Employee's Payment/Deduction, TLR3 is missing a Date Range Start Date and/or Date Range End Date. This field can be found in HR Record > Payroll Details > Fixed Payments/Deductions. Select the appropriate payment/deduction entry. |
| 4832 | Pay End Date cannot be before Pay Start Date | Error - Correct issue before submitting your Workforce Census | Check the employee's Fixed Payment/Deduction . The Employee's Payment/Deduction Date Range End Date cannot be prior to the Date Range Start Date . This field can be found in HR Record > Payroll Details > Fixed Payments/Deductions. Select the appropriate payment/deduction entry. |
| 4830 | Where Category of Additional Payment is provided the Additional Payment Amount must also be provided | Error - Correct issue before submitting your Workforce Census | Check the employee's Fixed Payment/Deduction . The Employee's Payment/Deduction value must be entered This field can be found in HR Record > Payroll Details > Fixed Payments/Deductions. Select the appropriate payment/deduction entry. |
| 4820 | Additional Payment Amount is in an invalid format. Format must be 999999.99 | Error - Correct issue before submitting your Workforce Census | Check the employee's Fixed Payment/Deduction . The Employee's Payment/Deduction is in the incorrect format and must be 99999.99. This field can be found in HR Record > Payroll Details > Fixed Payments/Deductions. Select the appropriate payment/deduction entry. |
| 4810 | Where Additional Payment Amount is provided the Category of Additional Payment must also be provided | Error - Correct issue before submitting your Workforce Census | Check the set up of the Payment/Deduction . The Workforce Census Category against the Payment/Deduction is incorrect. The Workforce Census Category must be selected from the drop down. This field can be found in Payroll > Definitions > Payment/Deduction > Features. |
| 4800 | Category of Additional Payment is invalid | Error - Correct issue before submitting your Workforce Census | Check the set up of the Payment/Deduction . The Workforce Census Category against the Payment/Deduction is incorrect. The Workforce Census Category must be selected from the drop down. This field can be found in Payroll > Definitions > Payment/Deduction > Features. |
| 4780 | Weeks per year is missing | Error - Correct issue before submitting your Workforce Census | Check the set up of the Whole Time Equivalent related to the employee. The Whole Time Equivalent associated to the employee requires an entry in Weeks per Year. This field can be found in Personnel > Definitions > Terms and Conditions > Whole Time Equivalent. |
| 4770 | Weeks per year is invalid | Error - Correct issue before submitting your Workforce Census | Check the set up of the Whole Time Equivalent related to the employee. The Whole Time Equivalent associated to the employee has an invalid format in the Weeks per Year. This field can be found in Personnel > Definitions > Terms and Conditions > Whole Time Equivalent. |
| 4765Q | FTE hours normally expected to be at least 24 and no greater than 40 | Query Only - This will not prevent you from submitting your Workforce Census | Check the set up of the Whole Time Equivalent related to the employee.The Whole Time Equivalent associated to the employee has Hours per Week set that are less than 24 and greater than 40 Hours. Check that this is correct. This field can be found in Personnel > Definitions > Terms and Conditions > Whole Time Equivalent. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4760 | FTE Hours per week is missing | Error - Correct issue before submitting your Workforce Census | Check the set up of the Whole Time Equivalent related to the employee. The Whole Time Equivalent associated to the employee has an invalid format in the Hours Per Week. The Hours per week format must be 99.99. This field can be found in Personnel > Definitions > Terms and Conditions > Whole Time Equivalent. |
| 4750 | FTE Hours per week is invalid | Error - Correct issue before submitting your Workforce Census | Check the set up of the Whole Time Equivalent related to the employee. The Whole Time Equivalent associated to the employee has an invalid format in the Hours Per Week. The Hours per week format must be 99.99. This field can be found in Personnel > Definitions > Terms and Conditions > Whole Time Equivalent. |
| 4746Q | The open contract for this member of staff is for less than 0.5 hours per week. If this is a zero hours contract it should be removed from the return. Please confirm if the hours recorded are correct. | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's Hours Per Week. Zero hours contracted workers do not require a contract return. The Include in SWC field must be set to No. This field can be found in HR Record > Employment > Employment History > Workforce Census. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4745Q | Member of staff is working more than 48 hours a week. Please confirm if this is true | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's Hours per Week on all contracts. The Hours per Week are over the amount expected. Check this is correct. The fields can be found in HR Record > Employment > Employment History > Details. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4740 | Hours worked per week is missing | Error - Correct issue before submitting your Workforce Census | Check the employee's Hours per Week. The Hours per Week must be entered onto the employment history. The fields can be found in HR Record > Employment > Employment History > Details. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4735 | Hours worked per week must not be provided for both Post and Role for the same contract or service agreement | Error - Correct issue before submitting your Workforce Census | Check the employee's Hours per Week .The Hours per Week must be entered onto the employment history. Providing that the employment history entry has both a post and role, the Hours per Week will be populated for both. The fields can be found in HR Record > Employment > Employment History > Details. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4730 | Hours worked per week is in an invalid format. Format must be 99.99 | Error - Correct issue before submitting your Workforce Census | Check the employee's Hours per Week. The Hours per Week must be in a 99.99 format and not have further decimal places. The fields can be found in HR Record > Employment > Employment History > Details. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4725Q | Role of TASS (Teaching Assistant) or HLTA (Higher Level Teaching Assistant) should normally be linked to post of TAS (Teaching Assistant) | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's Post and/or Role . Where a Role is set to Teaching assistant or Higher Level Teaching Assistant then the Post should be Teaching Assistant. The fields can be found in HR Record > Employment > Employment History > Workforce Census . Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4723Q | Post appears to be inconsistent with Role Identifier | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's Post and/or Role . The Post selected does not match the Role selected. Check both for inconsistencies. Most Posts will have a corresponding Role to use. The fields can be found in HR Record > Employment > Employment History > Workforce Census. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4722Q | Post appears to be inconsistent with Role Identifier | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's Post and/or Role . The Post selected does not match the Role selected. Check both for inconsistencies. Most Posts will have a corresponding Role to use. The fields can be found in HR Record > Employment > Employment History > Workforce Census. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4720 | Post is inconsistent with Role Identifier | Error - Correct issue before submitting your Workforce Census | Check the employee's Post and/or Role. The Post selected does not match the Role selected. Check both for inconsistencies. Most Posts will have a corresponding Role to use. The fields can be found in HR Record > Employment > Employment History > Workforce Census . Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4710 | Role Identifier is missing or invalid | Error - Correct issue before submitting your Workforce Census | Check the employee's Role . All contract's require a Role selected from the drop down. This field can be found in HR Record > Employment > Employment History > Workforce Census . Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4700 | No Role details have been supplied | Error - Correct issue before submitting your Workforce Census | Check the employee's Role. All contract's require a Role selected from the drop down. This field can be found in HR Record > Employment > Employment History > Workforce Census. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4610 | Origin must be provided for teachers who joined after 2009-08-31 | Error - Correct issue before submitting your Workforce Census | Check the employee's Origin, Role and/or Date Started. The Origin is missing for an employee with a Role of teacher with a Date Started after 31/08/2009. This field can be found in HR Record > Employment > Employment History > Workforce Census. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4600 | Origin is invalid | Error - Correct issue before submitting your Workforce Census | Check the employee's Origin. The Origin selected is invalid and must be selected from the drop down. This field can be found in HR Record > Employment > Employment History > Workforce Census. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4588 | If leaving reason is 'Deceased' then Destination must be 'Other'. | Error - Correct issue before submitting your Workforce Census | Check the employee's Destination and/or Leaving Reason . When the Leaving Reason selected is 'Deceased', the Destination must be 'Other'. Adjust accordingly. These fields can be found in HR Record > Employment > Employment History > Workforce Census . Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4587 | If leaving reason is 'Not Applicable- Change of Contract' then Destination must be the same | Error - Correct issue before submitting your Workforce Census | Check the employee's Destination and/or Leaving Reason. When the Leaving Reason selected is 'Left for other teaching post', the Destination must be the same. Adjust accordingly. These fields can be found in HR Record > Employment > Employment History > Workforce Census. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4586 | If leaving reason is 'Left for other teaching Post' or 'Still in Education' then Destination must be employment in education | Error - Correct issue before submitting your Workforce Census | Check the employee's Destination and/or Leaving Reason . The Destination selected must be indicative of an employee being employed in another educational establishment or remaining in education thermselves where their Leaving Reason is 'Left for other teaching post' or 'still in education'. Adjust accordingly. Both fields can be found in HR Record > Employment > Employment History > Workforce Census . Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4585 | Leaving Reason is invalid | Error - Correct issue before submitting your Workforce Census | Check the employee's Leaving Reason on the employment history. The Leaving Reason code selected is invalid and must be selected from the drop down. This field can be found in HR Record > Employment > Employment History > Workforce Census. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4580 | Destination code is invalid | Error - Correct issue before submitting your Workforce Census | Check the employee's Destination. The Destination code selected is invalid entry must be selected from the drop down. This field can be found in HR Record > Employment > Employment History > Workforce Census . Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4570 | Daily Rate is invalid | Error - Correct issue before submitting your Workforce Census | Check the employee's Daily Rate. The Daily Rate selected is invalid, entry must be set to Yes or No. This field can be found in HR Record > Employment > Employment History > Workforce Census. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4565Q | Staff member appears to be paid more than the maximum of the local government pay scale, please supply a reason in a return level note | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's Salary Grade and/or Scale point. The Actual Salary assigned is higher than expected for the employee, based on the local government pay scale. It the Salary Grade and Scale Point are correct, check the Post and Role assigned. This fields can be found in HR Record > Employment > Employment History > Details and Workforce Census. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4560 | Safeguarded Salary is in an invalid format. Format should be ‘1’ or ‘0‘ or ‘true’ or ‘false’ | Error - Correct issue before submitting your Workforce Census | Check the Safeguarded Salary. The Safeguarded Salary must be True or False. This field can be found in HR Record > Employment > Employment History > Workforce Census . Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4555 | Pay (i.e. Base Pay, Pay Range, Pay Framework, Pay Range Minimum and Pay Range Maximum) must not be provided for both Post and Role for the same contract or service agreement | Error - Correct issue before submitting your Workforce Census | The System will not allow the payments to be entered for both Post and Role and will submit the payment information for only one. IF you receive this error, raise a Support Ticket. |
| 4550 | Base Pay must not be provided where Daily Rate is Y | Error - Correct issue before submitting your Workforce Census | Check the employee's Daily Rate. Where the Daily Rate is Set to Yes, The Actual Salary must be Nil. This field can be found in HR Record > Employment > Employment History > Workforce Census . Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4545Q | Staff member appears to be paid less than the minimum wage for apprentices, please supply a reason in a return level note | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's Salary and/or FTE. The hourly rate calculated for the employee is less than the minimum wage for apprentices. Check that this is correct. There may be an issue with the Hours per Week, Week Per Year, Whole Time Equivalent or Actual Salary entered on the Employment History. This field can be found in HR Record > Employment > Employment History > Details. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4540 | If staff member is not paid by a Daily Rate then Base Pay must be provided | Error - Correct issue before submitting your Workforce Census | Check the employee's Daily Rate. Where the Daily Rate is set to No, The Actual Salary must be entered in the Employment History. This will either be entered manually or automatically picked up where a Salary Grade and Scale Point is used and Hours per Week greater than zero. This field can be found in HR Record > Employment > Employment History > Details . Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4530 | Base Pay is in an invalid format. Format must be 999999.99 | Error - Correct issue before submitting your Workforce Census | Check the employee's Salary. The Actual Salary format is showing in an incorrect format. The format must be 999999.99. The Actual Salary will automatically be picked from the value set in the Employment History if present. The Employee must have an Hours Per Week greater than Zero. This field can be found in HR Record > Employment > Employment History > Details. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4524Q | Please supply the Pay Range Maximum for this leadership teacher. | Query Only - This will not prevent you from submitting your Workforce Census | Check the set up of the Salary Grade and/or the employee’s Employment History. An invalid Pay Range Minimum has been selected. This must be selected for Leadership Salary Grades. Check the pay framework on the Employment History. Check HR Record > Employment > Employment History and if the pay framework is not set, it will use the default salary set in the salary grade. The default field can be found in Personnel > Definitions > Terms and Conditions > Salary Grade. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4523Q | Please supply the Pay Range Minimum for this leadership teacher | Query Only - This will not prevent you from submitting your Workforce Census | Check the set up of the Salary Grade and/or the employee’s Employment History. An invalid Pay Range Minimum has been selected. This must be selected for Leadership Salary Grades. Check the pay framework on the Employment History. Check HR Record > Employment > Employment History and if the pay framework is not set, it will use the default salary set in the salary grade. The default field can be found in Personnel > Definitions > Terms and Conditions > Salary Grade. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4522Q | Teacher is being paid under 'Pre 2014' framework even though they arrived after 31 August 2014: Please supply a reason in a return level note. | Query Only - This will not prevent you from submitting your Workforce Census | Check the set up of the Salary Grade and/or the employee’s Employment History. An invalid Pay Framework has been selected. This must be selected from the drop down box for Leadership Salary Grades. Check the pay framework on the Employment History. Check HR Record > Employment > Employment History and if the pay framework is not set, it will use the default salary set in the salary grade. The default field can be found in Personnel > Definitions > Terms and Conditions > Salary Grade. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4521Q | Please supply the Framework under which this leadership teacher is being paid, ie ‘Pre 2014’ framework or ‘2014’ framework | Query Only - This will not prevent you from submitting your Workforce Census | Check the set up of the Salary Grade and/or the employee’s Employment History. An invalid Pay Framework has been selected. This must be selected from the drop down box for Leadership Salary Grades. Check the pay framework on the Employment History. Check HR Record > Employment > Employment History and if the pay range is not set, it will use the default salary set in the salary grade. The default field can be found in Personnel > Definitions > Terms and Conditions > Salary Grade. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4517Q | This return contains no Pay Review Dates, please ensure that this is correct. | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's the Pay Review Dat e within the employee's employment history. The Pay Review Date is missing. Check that this is correct. This field can be found in HR Record > Employment > Employment History > Workforce Census . Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4516Q | Teacher should have had a pay review since beginning of previous academic year. If they have not, please supply a reason in a return level note. | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's the Pay Review Date within the employee's employment history. The Pay Review Date specified is prior to the last expected Pay Review Date of a Teacher. Check that this is correct and update if necessary. This field can be found in HR Record > Employment > Employment History > Workforce Census. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4515 | No Payment information has been provided | Error - Correct issue before submitting your Workforce Census | Check the file created by the Submit Workforce Census function. The system will automatically populate your payment information based on each employee's employment history. The file uploaded to COLLECT may be corrupt and so is not populating the contract section. Run the Submit Workforce Census function again and resubmit the file to COLLECT. |
| 4505 | Pay Range is invalid for the given post. Leading practitioners must be paid under the 'Leading Practitioners' pay Range. | Error - Correct issue before submitting your Workforce Census | Check the set up of the Salary Grade related to the employee, and/or the employee's Role. The Role associated to the employee suggests that their Salary Grade has an incorrect Pay Range Selected. The Pay Range for roles such as Leading Practitioners must be either 'Leading Practitioners'. The Pay Range can be found in Personnel > Definitions > Terms and Conditions > Salary Grade. The Post can be checked in HR Record > Employment > Employment History > Workforce Census. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4495Q | Daily Rate should not be used except for agency or service agreement teachers | Check the employee's Daily Rate . The Daily Rate is likely not required for the selected employee. This field can be found in HR Record > Employment > Employment History > Workforce Census. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
|
| 4490 | Pay Range is invalid for the given Post. Head teachers, Deputy Heads and Assistant Heads must be paid under the 'Leadership Pay Range' or an 'Other Pay Range | Error - Correct issue before submitting your Workforce Census | Check the set up of the Salary Grade and/or the employee’s Employment History and/or the employee’s Post. An invalid Pay Range has been selected or The Pay Range associated to the employee suggests that the Post is incorrect. Check both areas and adjust if required. The appropriate value must be selected from the drop down. Check the pay range on the Employment History. Check HR Record > Employment > Employment History and if the pay range is not set, it will use the default salary set in the salary grade. The default field can be found in Personnel > Definitions > Terms and Conditions > Salary Grade. |
| 4480Q | The Pay Range supplied is not valid for a support staff or teaching assistant Post | Query Only - This will not prevent you from submitting your Workforce Census | Check the set up of the Salary Grade and/or the employee’s Employment History and/or the employee’s Post. An invalid Pay Range has been selected or The Pay Range associated to the employee suggests that the Post of Support staff or Teaching Assistant is incorrect. Check both areas and adjust if required. The appropriate value must be selected from the drop down. Check the pay range on the Employment History. Check HR Record > Employment > Employment History and if the pay range is not set, it will use the default salary set in the salary grade. The default field can be found in Personnel > Definitions > Terms and Conditions > Salary Grade. The Post can be checked in HR Record > Employment > Employment History > Workforce Census. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4470Q | Qualified Status inconsistent with Pay Range type | Query Only - This will not prevent you from submitting your Workforce Census | Check the set up of the Salary Grade and/or the employee’s Employment History and/or the employee’s QT Status. An invalid Pay Range has been selected or the Pay Range associated to the employee suggests that the QT Status set to the employee is incorrect. The appropriate value must be selected from the drop down. Check the pay range on the Employment History. Check HR Record > Employment > Employment History and if the pay range is not set, it will use the default salary set in the salary grade. The default field can be found in Personnel > Definitions > Terms and Conditions > Salary Grade. The QT Status can be checked in HR Record > Workforce Census > HR Record. You may also click the entry within the Check Workforce Census to be directed straight into this window. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4460 | Pay Range is invalid | Error - Correct issue before submitting your Workforce Census | Check the set up of the Salary Grade and/or the employee’s Employment History. An invalid Pay Range has been selected. The appropriate value must be selected from the drop down. Check the pay range on the Employment History. Check HR Record > Employment > Employment History and if the pay range is not set, it will use the default salary set in the salary grade. The default field can be found in Personnel > Definitions > Terms and Conditions > Salary Grade. |
| 4440Q | Date of Arrival in School should not be later than the start of the contract: If Date of Arrival is later, please supply a reason in a return level note | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's Date Started. The Date started should not be after the contract start date in the employment history. Check that this is correct. This field can be found in HR Record > Employment > Terms. You may also click the entry within the Check Workforce Census to be directed straight into this window. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4430Q | Date of Arrival in School has not been supplied. Please confirm if this is correct | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's Date Started. The Date Started is missing and must be entered, if known. This field can be found in HR Record > Employment > Terms . You may also click the entry within the Check Workforce Census to be directed straight into this window. If not known, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4425Q | Date of Arrival in School is more than 40 years ago. Please confirm if this is correct | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's Date Started. The Date Started is over 40 years ago. Check that this is correct. This field can be found in HR Record > Employment > Terms. You may also click the entry within the Check Workforce Census to be directed straight into this window. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4420 | Date of Arrival in School is invalid | Error - Correct issue before submitting your Workforce Census | Check the employee's Date Started. The Date Started is invalid and must be adjusted accordingly. The format required is DD/MM/YYYY. This field can be found in HR Record > Employment > Terms. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4417Q | If role is HLTA then HLTA Status is expected to be true | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's HLTA Status and/or Role. Where a Role of HLTA has been selected, the HLTA Status must be set to true. This field can be found in HR Record > Workforce Census > HR Record. You may also click the entry within the Check Workforce Census to be directed straight into this window. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4416 P | Post shown as Assistant Head Teacher. One of the associated Roles must also be Assistant Head | Error - Correct issue before submitting your Workforce Census | Check the employee's Post and/or Role . Where a Post of Assistant Head Teacher is selected, the Role must also be Assistant Head Teacher. This field can be found in HR Record > Employment > Employment History > Workforce Census. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4415 | Post shown as Deputy Head. One of the associated Roles must also be Deputy Head | Error - Correct issue before submitting your Workforce Census | Check the employee's Post and/or Role . Where a Post of Deputy Head is selected, the Role must also be Deputy Head. This field can be found in HR Record > Employment > Employment History > Workforce Census. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4414 | Post shown as Head Teacher. One of the associated Roles must also be Head Teacher | Error - Correct issue before submitting your Workforce Census | Check the employee's Post and/or Role. Where a Post of Head Teacher is selected, the Role must also be Head Teacher. This field can be found in HR Record > Employment > Employment History > Workforce Census. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4413 | Post shown as Executive Head. One of the associated Roles must also be Executive Head | Error - Correct issue before submitting your Workforce Census | Check the employee's Post and/or Role . Where a Post of Executive Head is selected, the Role must also be Executive Head. This field can be found in HR Record > Employment > Employment History > Workforce Census . Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4410 | Post is missing or invalid | Error - Correct issue before submitting your Workforce Census | Check the employee's Post. A valid Post is required, appropriate to the employee's Activity. This field can be found in HR Record > Employment > Employment History > Workforce Census. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4400 | Contract End Date cannot be before contract Start Date | Error - Correct issue before submitting your Workforce Census | Check the employee's Start Date and/or End Date on their employment history. Either the Start Date or End Date is incorrect on the contract. An employee cannot have started a contract after the end date. Adjust accordingly. This field can be found in HR Record > Employment > Employment History > Details. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4390Q | Destination code has been provided therefore contract End Date should be specified: If it cannot be supplied, please give a reason in a return level note | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's Destination and/or End Date. The End Date is required or the Destination should be removed depending on whether the Status set is historical. This field can be found in HR Record > Employment > Employment History > Workforce Census . Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. If the end date is unavailable, supply a reason in a return level note once submitted to COLLECT. |
| 4385 | Destination code must be provided for completed contracts | Error - Correct issue before submitting your Workforce Census | Check the employee's Destination and/or Status. The Destination is required for contracts with a Status of Historical. Valid entries can be selected from the drop down. This field can be found in HR Record > Employment > Employment History > Workforce Census. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4380 | Contract/Service Agreement Type is Fixed Term therefore End Date must be specified | Error - Correct issue before submitting your Workforce Census | Check the employee's End Date and/or Contract Type in their employment history. An End date is required for all contracts with a Contract Type set as Fixed Term. This field can be found in HR Record > Employment > Employment History > Details. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4377Q | Contract/Service Agreement end date should be on or prior to Census Reference Date for this type of contract or agreement | Error - Correct issue before submitting your Workforce Census | Check the employee's End Date in their employment history.The End Date specified suggests that the contract is out of scope for the School Workforce Census and the Include in SWC must be set to No where the date is correct. This field can be found in HR Record > Employment > Employment History > Workforce Census . Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4376 | Service agreements and temporary contracts that have lasted less than 28 days, as of reference date, will be picked up in the next year’s census if they go on to last 28 days or more. Do not include them now. | Error - Correct issue before submitting your Workforce Census | Check the employee's End Date in their employment history. The End Date specified suggests that the contract is out of scope for the School Workforce Census and the Include in SWC must be set to No where the date is correct. This field can be found in HR Record > Employment > Employment History > Workforce Census. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4375 | Contract/Service Agreement end date must be at least 27 days after the start date | Error - Correct issue before submitting your Workforce Census | Check the employee's End Date in their employment history. The End Date specified suggests that the contract is out of scope for the School Workforce Census and the Include in SWC must be set to No where the date is correct. This field can be found in HR Record > Employment > Employment History > Workforce Census. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4370 | Contract End Date is invalid. | Error - Correct issue before submitting your Workforce Census | Check the employee's End Date in their employment history. The End Date specified is in the incorrect format. This must be DD/MM/YYYY. This field can be found in HR Record > Employment > Employment History > Details. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4360 | Contract has invalid end date for this Census. | Error - Correct issue before submitting your Workforce Census | Check the employee's End Date in their employment history. The End Date specified suggests that the contract is out of scope for the School Workforce Census and the Include in SWC must be set to No where the date is correct. This field can be found in HR Record > Employment > Employment History > Workforce Census . Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4357Q | Contract/Service Agreement Start Date more than 30 years ago | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's Start Date in their employment history. A Start Date has been set so that the contract age is more than 30 years. Check that this is correct. This field can be found in HR Record > Employment > Employment History > Details. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4355 | Contract/Service Agreement Start Date can not be in the future | Error - Correct issue before submitting your Workforce Census | Check the employee's Start Date in their employment history. A Start Date has been set in the future on the employment history contract. Any proposed contracts must have the Include in SWC set to No. This field can be found in HR Record > Employment > Employment History > Details. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4350 | Contract/Service Agreement Start Date is missing | Error - Correct issue before submitting your Workforce Census | Check the employee's Start Date in their employment history. A Start Date is required on every employment history contract. This field can be found in HR Record > Employment > Employment History > Details. Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4310 | Contract/Service Agreement Type is missing or invalid | Error - Correct issue before submitting your Workforce Census | Check the employee's Contract Type. The Contract Type is required and can be selected from the drop down. This field can be found in HR Record > Employment > Employment History > Other . Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4280 | LA or School Level indicator missing or invalid | Error - Correct issue before submitting your Workforce Census | Check the employee's LA School Level. The LA School Level is required for all employees and must be set to School. This field can be found in HR Record > Employment > Employment History > Workforce Census . Select the appropriate employment history entry. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4250 | QTS Route is invalid | Error - Correct issue before submitting your Workforce Census | Check the employee's QTS Route. A valid QTS Route must be selected from the list of valid enties. This field can be found in HR Record > Workforce Census > HR Record. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4245 | Person cannot be shown as having HLTA status and be under 18 on | Error - Correct issue before submitting your Workforce Census | Check the employee's HLTA Status and/or Date of Birth. An employee under the age of 18 years old on the Census Date should not have a HTLA Status of True. Adjust accordingly. This field can be found in HR Record > Workforce Census > HR Record. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4240 | HLTA Status is invalid | Error - Correct issue before submitting your Workforce Census | Check the employee's HLTA Status .The HLTA Status requires a True or False Entry. This field can be found in HR Record > Workforce Census > HR Record. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4238Q | HLTA Status is missing for a Teaching Assistant | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's HLTA Status and/or Role. The employee likely has a Teaching Assistant Role set and therefore the HLTA Status requires a True or False Entry. This field can be found in HR Record > Workforce Census > HR Record. You may also click the entry within the Check Workforce Census to be directed straight into this window. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4237Q | Person is not expected to have QTLS and be under 21 years of age on | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's QTL Status and/or Date of Birth. An employee under the age of 21 years old on the Reference date should not have a QTL Status of True. Adjust accordingly. This field can be found in HR Record > Workforce Census > HR Record. You may also click the entry within the Check Workforce Census to be directed straight into this window. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4236Q | Person is not expected to have EYTS and be under 21 years of age on | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's Early Years Teaching Status and/or Date of Birth. An employee under the age of 21 years old on the Census Date should not have an Early Years Teaching Status of True. Adjust accordingly. This field can be found in HR Record > Workforce Census > HR Record. You may also click the entry within the Check Workforce Census to be directed straight into this window. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4235Q | Person is not expected to have QTS and be under 21 years of age on | Query Only - This will not prevent you from submitting your Workforce Census | Check the employee's QT Status. An employee under the age of 21 years old on the Census Date should not have a QT Status of True. Adjust accordingly. This field can be found in HR Record > Workforce Census > HR Record. You may also click the entry within the Check Workforce Census to be directed straight into this window. If correct, you may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4232 | QTLS is invalid | Error - Correct issue before submitting your Workforce Census | Check the employee's QTL Status. The QTL Status requires a True or False Entry. This field can be found in HR Record > Workforce Census > HR Record. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4231 | EYTS is invalid | Error - Correct issue before submitting your Workforce Census | Check the employee's Early Years Teaching Status. The Early Years Teaching Status requires a True or False Entry. This field can be found in HR Record > Workforce Census > HR Record. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4230 | QTS is invalid | Error - Correct issue before submitting your Workforce Census | Check the employee's QT Status. The QT Status requires a True or False Entry. This field can be found in HR Record > Workforce Census > HR Record. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4228 | Qualified Status is missing for a teacher | Error - Correct issue before submitting your Workforce Census | Check the employee's QT Status and/or Role. The employee likely has a Teacher Role set and therefore the QT Status requires a True Entry. This field can be found in HR Record > Workforce Census > HR Record. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4225 | Disability is missing or invalid | Error - Correct issue before submitting your Workforce Census | Check the employee's Disability . All employees require an Disability selected from the drop down. This field can be found in HR Record > Workforce Census > HR Record. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4220 | Ethnicity is missing or invalid | Error - Correct issue before submitting your Workforce Census | Check the employee's Ethnic Origin. All employees require an Ethnic Origin selected from the drop down. This field can be found in HR Record > HR Record > Personal Details . You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4200 | Person’s age must be between 13 and 100 years | Error - Correct issue before submitting your Workforce Census | Check the employee's Date of Birth and age. An incorrect Date of Birth has likely been entered. This field can be found in HR Record > HR Record > Personal Details . You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4195Q | Two other members of staff also have a date of birth of 1 January, please confirm if this is correct | Query Only - This will not prevent you from submitting your Workforce Census | The employee's Date of Birth must be checked. Where a Date of Birth is entered for two or more members of staff of 01/01/YYYY. This may be an incorrect entry, check that this is correct. This field can be found in HR Record > HR Record > Personal Details . You may also click the entry within the Check Workforce Census to be directed straight into this window. You may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4190 | Date of Birth missing or has invalid format. Format should be CCYY-MM-DD | Error - Correct issue before submitting your Workforce Census | The employee's Date of Birth must be checked. A Date of Birth is required in the format DD/MM/YYYY. This will be adjusted to the required format on submission. This field can be found in HR Record > HR Record > Personal Details . You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4180 | Gender is missing or invalid | Error - Correct issue before submitting your Workforce Census | The employee's Gender must be checked. All employees require a Gender. This field can be found in HR Record > HR Record > Personal Details . You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4160Q | Member of workforce with missing NI Number | Error - Correct issue before submitting your Workforce Census | The employee's NI Reference must be checked. An employee must have a valid NI Reference where possible, in the format AA123456A (no spaces are to be used). This field can be found in HR Record > HR Record > Personal Details . You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4155 | Temporary NI numbers must not be supplied. This must be replaced or removed | Error - Correct issue before submitting your Workforce Census | The employee's NI Reference must be checked. Where a temporary NI Reference has been used, then the reference must be replaced or removed. This field can be found in HR Record > HR Record > Personal Details . You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4150 | NI Number has invalid Format | Error - Correct issue before submitting your Workforce Census | The employee's NI Reference must be checked. An employee must have a valid NI Reference where possible, in the format AA123456A (no spaces are to be used). This field can be found in HR Record > HR Record > Personal Details . You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4140 | Former Family Name has two or more consecutive spaces | Error - Correct issue before submitting your Workforce Census | The employee's Previous Name must be checked. If providing a Previous Name, it must not have two consecutive spaces. This field can be found in HR Record > HR Record > Personal Details . You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4120 | Given Name is missing or has two or more consecutive spaces | Error - Correct issue before submitting your Workforce Census | The employee's Forename(s) must be checked. The Forename(s) is required and must not have two consecutive spaces. This field can be found in HR Record > HR Record > Personal Details. You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4110 | Family Name is missing or has two or more consecutive spaces | Error - Correct issue before submitting your Workforce Census | The employee's Surname must be checked. The Surname is required and must not have two consecutive spaces. This field can be found in HR Record > HR Record > Personal Details . You may also click the entry within the Check Workforce Census to be directed straight into this window. |
| 4105Q | Teacher number should be 7 or 8 digits | Query Only - This will not prevent you from submitting your Workforce Census | The employee's Teacher Number must be checked. The Teacher Number must be 7 or 8 digits. This field can be found in HR Record > Workforce Census > HR Record . You may also click the entry within the Check Workforce Census to be directed straight into this window. You may be required to supply a reason in a return level note once submitted to COLLECT. |
| 4100Q | Teacher with Teacher Number missing: Please supply a reason in a return level note | Query Only - This will not prevent you from submitting your Workforce Census | The employee's Teacher Number must be checked and updated with a valid Teacher Number where possible. This field can be found in HR Record > Workforce Census > HR Record . You may also click the entry within the Check Workforce Census to be directed straight into this window. If you are unable to provide a Teacher Number, supply a reason in a return level note once submitted to COLLECT. |
| 4095 | Please note that this return contains no absence records. Please ensure that this is correct and that absence data is being supplied to the Department by another source | Error - Correct issue before submitting your Workforce Census | The absence records may not been recorded in the system or the SWC Absence Categories have not been mapped to the Absence Analysis . This field is found in Personnel > Definitions > Absence Monitoring > Absence Analysis. |
| 4085Q | Please note that this return contains no contract records. Please ensure that this is correct and that contract data is being supplied to the Department by another source | Query Only - This will not prevent you from submitting your Workforce Census | Check the file created by the Submit Workforce Census function. The system will automatically populate your contract information based on each employee's employment history. The file uploaded to COLLECT may be corrupt and so is not populating the contract section. Run the Submit Workforce Census function again and resubmit the file to COLLECT. |