Release Notes for Software Version 2.11
New and Changed Features
System
New system variable
The following system variables have been added:
Date variables:
SYS.<YYYY> – Displays the current year
SYS.<MM> – Displays the current month (numeric)
SYS.<DD> – Displays the current day (numeric)
Time variables:
SYS.<HH> – Displays the current hour
SYS.<NN> – Displays the current minute
SYS.<SS> – Displays the current second
These can be incorporated into Workflow email text as well as being utilised in file and path names for output files created by the software such as those produced by the Workflow module or as the result of Transfer Templates or Payslip PDF creation from the Payroll module. For example the filename:
x:OrgfoldersHREmails<EMP_ID> <YYYY><MM><DD> <HH><NN>.docx
may result in the creation of a file
x:OrgfoldersHREmails12345 20151001 1215.docx
if it were created on the 1st October 2015 at 12:15 for employee reference 12345.
Personnel
Training details duration button
A new calculation button (button […] next to the Duration field) has been added to the Training window (HR Record > Credentials > Training) which calculates the duration of the training, in working days and hours, as per the absence capture facility. The duration will only be revised when this new button is selected. This enables a user to over-ride the values determined by the system by not electing to use this function button.
Diary – Clear entries after leave date
The system has been enhanced to remove all diary entries after the employees leave date when the employee HR status is left. This may be as a result of an automated facility in the system, as a result of the provision of a leaving date which has now been passed, or by a user manually altering the status of the employee. This ensures that any diaries of activity viewed via facilities such as the HR Portal, no longer include activity which although originally presented to the software when a leaving date was unknown, has since been superseded by a leave date being provided.
Address Sheet
The Address Sheet maintenance (HR Record > HR Record > Address Sheet) has been updated to correct the issue where the data for office phone and home phone number were changing at the point of save for the Home address, Emergency contact, Next of kin and Alternative tabs.
Training Course Maintenance
Any training courses with the status ‘Dormant’ (Personnel > Definitions > Staff Development > Training Course) and have a training rule set as induction ‘Yes’ will not appear in Training Courses in the Activity (Personnel > Definitions > Your Organisation > Activity)
HR Records – Employment History Proposed Salary
In the Employment History window (HR Record > Employment > Employment History), the software has been enhanced so that the proposed salary can now be maintained if a salary grade has been selected but no scale point has been provided. Previously this was only possible when both the Grade and Scale Point were omitted.
Amending Existing Records via the Authorisation Centre, for example: Employment History
The Queries have been enhanced to allow the unique transaction identifier (SEQ_ID) of each individual entry (such as an Absence, Training or Employment History record) to be included in exports created via the Export button, when defining and running a query.
If this same SEQ_ID is presented to the Authorisation centre then it will interpret the line being processed as a proposed amendment of an existing record (identified by the SEQ_ID) rather than the creation of a new record.
This new functionally allows amendments to be made to the Employment History, Pensions, Absences, and Training Records etc. by importing the changes.
However, users should refer to Jane systems for further guidance when applying any amendments.
Apply Salary Values
A new wizard has been created Apply Salary Values (Personnel > Definitions > Utilities > Functions). The wizard allows the user to apply or analyse salary changes which may be due to alterations to Grades and Scale Points or as the result of the manual provision of the Full Time Equivalent Salary. The existing global “Apply” process only considers employees who have been associated with a Salary Grade and Scale Point. This new facility considers manually allocated salaries as well. This includes Whole Time Equivalent Salaries imported using the facilities described above.
The process looks at all active primary and secondary active employment history records for the relevant employees. The employee’s new salary is calculated using the salary grade, scale point or the manual salary entered where there is no scale point, this is combined with other Terms such as the whole time equivalent from the employment history record(s) to determine an actual annual salary for the employee.
If you choose to apply the salary, the resulting salary is visible on the employee’s salary history window (HR Record > Employment > Salary History), as well as being available for reporting from the HR record and the employment history files. You can also confirm an employee’s changed salary by viewing the employee’sHR Card (summary details). The new salary is also used as the basis for any payroll payments defined as being based on the employee’s salary.
If you choose to analyse the salary, you can view a report for the resulting salary by clicking Queries in the software desktop, and selecting the Proposed Salaries table in the Personnel module.
Holiday Allowance
The Holiday Allowance functionality on the Employment History has been developed to automate the holiday allowance calculation each time the user selects save. The new functionality works in the same way as selecting the Holiday button.
The Holiday Allowance recalculates when a new Employment History record is created or when the following fields are amended. Start Date, End Date, Whole Time Equivalent, Weeks per Year and Hours per Week.
To remove the Holiday button from the Employment History window as it is now no longer required (System Setup > Housekeeping > System Definitions > Absences) uncheck the Review from Employment History.
Automatically Assign
If Personnel > Definitions > Terms and Conditions > Holiday Allowances > Automation > Automatically Assign is checked, the software will check each employee within the Qualifying Query and if the employee does not have holiday allowance record, for this holiday allowance type, for the current holiday year, a holiday allowance record will be created. If the Qualifying Query is based on the Employment History entity, or if Attach to Primary Active is checked, the number of days and hours assigned will be pro-rated based on
Start Date
End Date (if any)
WTE
Hours per Week
Weeks per Year
Automatically Rolled Over
If Personnel > Definitions > Terms and Conditions > Holiday Allowances > Automation > Automatically Rolled Over is checked, new holiday allowance records will be created for employees who are currently entitled to the allowance, a certain number of days (specified in Roll Over Days in Advance) before the current allowance expires.
Payroll
Timesheet status
On the Timesheet window (HR Record > Payroll Details > Timesheets), the Status field is no longer a mandatory item when updating a record.
When the Working File entry is created, the Start Date from the Timesheet is captured as the Activity Date on the Working File, rather than the date on which the Working File entry was created.
Importing Pension and NI balances for leavers
The software has been enhanced to allow the importing of year to date Pension History and NI Balances for leavers in the current tax year via the Authorisation Centre (System Setup > Authorisation Centre > Workbench).
The dropdown list within the Authorisation Centre now includes both the Pension History and NI Balances
The figures appear on the Pension History (HR Record > Balances > Pension History) and NI (HR Record > Balances > NI)
Pension Reversal – Payroll Locked
The software has been enhance to prevent any Pension Reversals being run while the Payroll is locked. A message ‘The Payroll to which the selected HR Record is attached is currently locked’ now appears when you try to make changes.
Payroll Report
A new Payroll Report (Payroll > Reports > Analysis Reports > Payroll Detail) has been added capturing the following to grid:-
- Gross to Net details
- PaymentsDeductions
- Pension(s)
- AOE
- Employers Ni and Pension
Depending upon the number of Pay elements and Pension schemes you have defined this may result in a number of columns being created, hence this is not suitable for a standard analysis report template. The information provided by this report can only be displayed in the Grid Viewer or exported for external use in Spreadsheets etc.
NI Category – Age
On the Payroll Details window (HR Records > Payroll Details > Payroll Details) the employee age now appears on the NI & PAYE tab next to the NI Category
Pension Status Period End
If the check box ‘Automatically Close Pension Records’ is selected (Payroll > Definitions > Module Setup > Module Definitions > Controls) at the Period End Process all employees with an Active Pension Status who are either leavers or their Pension record has a past end date will have their Pension Status changed to Closed.
All other pension status types (opt out, non-eligible, etc) will remain unchanged for any employees who leave.
Working File – Defaulting the GEN Code
A new Refresh button has been added to the Working File (HR Record > Payroll Details) to display the GEN Code for working file transactions
Occupational Sickness
Parameters
On the Occupational Sickness Parameters (Occupational Sick > Module Definitions > Module Definitions) a new check box has been added called Consider Current Pay Period.
Previously, Occupational sickness included the current period in all calculations. You now have the option to include the current period or not. If Consider Current Pay Period is selected, the system will automatically take all absence up to the current period into consideration. Where the check box is deselected, then the absence will only include the last and any other previous periods.
Offset SSP
On the Progression tab of the Occupational sick & child care scheme window (Occupational Sick > Module Definition > Occupational Sick & Child care scheme) a new option has been added to the Offset SSP.
You now have the option to CAP at Full Pay, as well as the Yes and No.
This prevents employees potentially receiving a higher payment than their full pay.
Queries
Maximum length of Queries filter
In the Queries, the software has been enhanced to allow the maximum length of the filter on Queries to 1,000 characters. This enables more exhaustive selection criteria, such as a list of specific Payroll Codes, to be defined.
Building and Room description within query
The Building and Room description has replaced the code within the Employment History query so that a more meaningful result to the query is shown.
Portal
Delete Annual Leave via Portal
The ability for Authorised Users to delete live annual leave records from the HR Portal has now been added.
Salary
A fix has been implemented which allows the salary of an employee to be displayed correctly in a form on the HR Portal.
Workflow
Document Creation
If the workflow action fails to create the specified document, typically due to the permissions assigned to the destination folder, the workflow will not be processed and will be held in the authorisation centre, along with a message explaining the error.
Email attachment
When attaching a file to an email in the workflow, a check is done when the workflow action is being processed. If the file path is not valid, the workflow will not be processed and it will be held in the authorisation centre, along with a message explaining the error.
Process – Maintenance
When a Scheduled workflow process has been saved, the Start button is automatically enabled.
When trying to start a Scheduled workflow process, a warning will be presented informing the user that the process needs to first be saved before it can be started. If OK is selected, the process will be started. If Cancel is selected, the process will not be started.
If a workflow process/action is exited without saving, a warning will be presented
The length of the Description field has been increased
Action – Maintenance
The Create, Open and Use fields under the Document tab have now been increased to accommodate up to 255 characters
The length of the Description field has been increased
The length of the email subject has been increased
If a workflow action is exited without saving, a warning will be presented
Actions – Email line managers line manager
When creating a Workflow Action Email, on the Email Setup tab, when specifying a recipient for the email, a new option has been added in called “Line Manager’s Line Manager”. This option will allow the email to include the line manager of the employee’s line manager as a recipient.
Actions – Candidate Interview Details
Candidate interview details can now be quoted within the workflow emails when the action function is set to the Candidate option.
Actions – Create Document
When creating a workflow, the ability to select custom SQL queries in the workflow process has now been added.
User Defined Fields (UDF) – Lists/Cross References – Setting via Workflow.
Previous versions of the software did not allow the updating of user-defined data items which were lists i.e. a code referring to an associated description. This facility has now been added.